Water ball

 ( 1990s Toys ) 

A water ball or water walking ball is a large inflatable sphere that allows a person inside it to walk across the surface of a body of water. The giant ball is usually two metres in diameter and has a entrance to allow for easy entry and exit. The water ball is similar to the zorb but it has only one layer and is designed for water travel rather than down-hill rolling. In the United Kingdom, the balls have been used at , marinas and lakes in an effort to keep children fit, Kids learn to walk on water. CBBC. as well as for fitness and rehabilitation for people of all ages.Mann, S., Hosseingholizadeh, A., Kumar, N., Jiao, A., & Leaver-Preyra, C. (2024, November). Extended Reality Waterball for Spinal Rehabilitation. In Proceedings of the 2nd International Workshop on Human-Centered Sensing, Networking, and Multi-Device Systems (pp. 11-16).

---

History One of the first water balls appeared in the film Diamonds Are Forever (1971) and in the music video for the Beach Boys song Getcha Back (1985). Beach Boys – Getcha Back. Retrieved: 2011-03-31. Charles Blane Jones designed the first water ball for public distribution in 1998.

---

Safety The balls can be safely used in accordance with safety standards set in ASTM F2374-20 Standard Practice For Design, Manufacture, Operation, And Maintenance Of Inflatable Amusement Devices, which includes:

"1.2.6 Stand-alone captured air inflatable devices that are designed to contain the patron within the elevated pressure space; are designed to be mobile during its intended use; or contain less than 270ft³ of air and do not include an anchoring or ballasting system. Examples include, but are not limited to: a water walking ball, a sports ball, a hamster ball, a hill-rolling ball."ASTM F2374-20 For safe operation, the ball must be contained in a soft padded area of a pool with no hard surfaces, or if in open water, it must be tethered to a ride operator or ride attendant.

See also earlier article.Standardization News, Walking on Water, Made Easier, Safety Consumer Products, ISSUE MONTH January/February ISSUE YEAR 2015, Patty Sullivan, Eli Bridge Co. • Jacksonville, Ill., and ASTM Staff: Katerina Koperna

---

History of waterball safety efforts The efforts to establish standards for safe operation of waterballs began with Patty Sullivan, President and CEO of Eli Bridge Company, a company specializing in amusement park rides and ride safety, in collaboration with ASTM, Standardization News, Walking on Water, Made Easier, Safety Consumer Products, ISSUE MONTH January/February ISSUE YEAR 2015.

---

Early safety concerns that have now been addressed These new safety regulations came into effect after earlier, April 1, 2011, concerns were expressed: The United States Government has warned of the dangers of using the balls, saying it "does not know of any safe way" to avoid the dangers of suffocation and drowning, among other hazards. There are recorded instances of children fainting and crashing onto hard surfaces while inside the balls, and the U.S. Consumer Product Safety Commission has encouraged amusement ride officials not to allow their use. The Commission chairman declared an intention to pursue the safety investigation further. Safety warning issued over 'walking water balls' The Guardian, 2011-03-31.

Charles Jones from Oklahoma developed a water ball commercially in 1998. He was invited by a British reporter to visit London to demonstrate the ball on a lake. As soon as he attempted to walk across the water, he lost his balance and fell. The ball deflated and filled rapidly with icy water. He was saved from sinking below the surface when an assistant dragged the ball back to dry land using a safety line, witnessed by a crowd of tourists.

The U.S. Consumer Product Safety Commission has warned of the dangers of the balls being used in a safe manner. The Commission is aware of two incidents involving water balls. In one, a child was found unresponsive after being inside the ball for a very brief period of time. In the second incident, a person inside the ball suffered a fracture when it fell out of a shallow, above-ground pool onto hard ground.

---

Construction Many water balls are constructed from polyvinyl chloride (PVC) 0.8–1.0 mm thick. Thermoplastic polyurethanes (TPU) are the best choice for use in cold weather or on snow. Some water balls are made from a PVC–TPU mix. More expensive balls use 100% TPU. Balls are typically made in China, and come in various sizes. A typical water ball stores flat and weighs 15 kilograms, and can be inflated in under a minute with a good air pump. Some models also have hand grips on the outside, and the surface can be printed on.

---

See also

• Zorbing
• Hamster ball
• List of inflatable manufactured goods

Post Comment